PMC Test Extender
The PMC test extender provides an active interface between a PMC carrier slot (PCI bus) and a PCI Mezzanine Card (PMC).
Technology overview:
It fits on a PMC carrier and provides one extended connection for a standard PMC module. The test extender allows the integrator full access outside the cage to a PMC boards. The rear I/O connections are also connected through the PMC J4 connector.
The design utilizes a TI PCI2250I 32 Bit transparent PCI/PCI Bridge to transfer data between the PMC carrier slot and the PMC site insuring an excellent communication path between the PMC module and the carrier.
PMC Test Extender specifications:
- PMC test extender compatible with any PMC carrier
- Single PMC site for all available for standard PMC boards
- Dimensions:
- Height – 74 mm
- Depth – 215 mm
- Width – 10 mm (single slot) Supply Voltage: +3.3V
- PMC VIO: fixed +3.3V VIO source.
- Supply Power (maximum): 1.6 watts (not including installed PMC module)
- Power consumption: for the PMC site cannot exceed 25W.
- Operating Temperature: 0 to 50 °C
- Storage Temperature: -55 to 105 °C
- Operating Humidity: 10% to 80% (non-condensing).
- PMC Connectors: The PMC site includes three PMC connectors (J1, J2, J4). The extended J4 connector is wired to the PMC J4 connector.
- PMC Interface: The PMC site supports 32 bit / 33 MHz interface through a TI PCI2050 PCI/PCI Bridge.
- 1 year limited warranty
ORDERING INFORMATION:
- PCI_700.110
For technical specifications please ask your representative for the DATASHEET or fill out the request form here.