Products > CompactPCI > Carrier

6U PMC Carrier – Conduction Cooled

40 pieces IN STOCK as of August 2010!!!

 

This conduction cooled 6U CompactPCI dual slot PMC provides an active interface between the CompactPCI bus (backplane) and a PCI Mezzanine Card (PMC). This product addresses the needs of aerospace, military, and rugged applications. It contains a thermal heat frame made of aluminum that fits together with conduction cooled PMC modules. Conduction cooling conducts heat away from the hot spots of the board and transfers the heat to the card edges and to the system chassis. No active ventilation is necessary inside of the system, which means the boards are sealed from the environmental influences found outside of the chassis. The heat frame and integrated wedge locks for the conduction cooling stiffens the carrier and PMC module enabling the board to resist high shock and vibration.

The design utilizes a 64-Bit Pericom P17C8154BNAI transparent PCI/PCI Bridge to transfer data between the cPCI backplane and the PMC site insuring an excellent communication path between the PMC module and the backplane.

The carrier plus conduction cooled PMC modules enable the integrator to build modular systems based on a variety of off-the-shelf conduction cooled PMC boards. System solutions are built much faster and offer higher flexibility compared to the design of a specific CPCI I/O board.

 

Specifications:

  • 6U CompactPCI carrier board occupying one slot
  • Two PMC sites for all available for Conduction Cooled PMC boards
  • Conformance: The 6U cPCI PMC Carrier is an IEEE.1-2201-compliant conduction-cooled cPCI carrier card
  • Dimensions:
    • Height – 233 mm
    • Depth – 160 mm
    • Width – 20.27 mm (4HP – single slot)
  • Weight – 325 grams
  • Supply Voltage: +3.3V
  • PMC VIO: fixed +3.3V VIO source.
  • Supply Power (maximum): 1.6 watts (not including installed PMC module)
  • Power consumption: for the PMC site cannot exceed 15W. NOTE: Combined power consumption for both PMC sites cannot exceed22.5W.
  • Operating Temperature: -40 to 85 °C
  • Storage Temperature: -55 to 105 °C
  • Operating Humidity: 10% to 80% (non-condensing).
  • Both PMC sites include four PMC connectors (J1, J2, J3, J4) wired per the IEEE 1386.1 specifications. The J4 connectors are wired to the cPCI backplane (PMC1 to cPCI_J3; PMC0 to cPCI_J5) per the PICMG 2.3 Rev 1.0 specification.
  • PMC Interface: The PMC site supports 32/64-bit / 33/66 MHz interface through a Pericom P17C8154BNAI PCI/PCI Bridge.
  • 1 year limited warranty

ORDERING INFORMATION:

  • PCI_300.125


For technical specifications please ask your representative for the DATASHEET or fill out the request form here.



Intel Core I7