Products > CompactPCI > Extender
3U cPCI 32-Bit Test Extender with debug switches
Measurement and testing of CompactPCI® assemblies in the 3U Euro-board form factor is greatly facilitated by the use of this test adapter. Our extenders include a PCI Bridge. Some competitor products do not provide a PCI bridge, thus reducing extender costs by tolerating a violation of the PCI specs. Overall PCI compatibility however is a must in order to achieve total reliability. Please bear these facts in mind, when comparing prices of PCI Extenders. All P2 signals can be measured at the back of the board. The power rails are jumpered for current measurement of the board under test. Additional drivers are not needed. The PCI devices are detected by standard PCI BIOS.
3U CompactPCI Test Extender specifications:
- 32-bit bridge with TI 2250 (33 MHz)
- 3U, 4HP
- Full plug-and-play support
- 3.3 V backplane V(I/O)
- Guided insertion of test specimens from 1 sides
- Specifications: PCI™ V2.1, PICMG 2.0 R2.1 and R3.0
- 1 year limited warranty
ORDERING INFORMATION:
- PCI_300.135P
For technical specifications please ask your representative for the DATASHEET or fill out the request form here.